Upload a RoofScope, Roofr, EagleView or Hover report. Metal Cut List reads the roof drawing and the lengths printed on it, lets you check and fix every line, then prints a panel cut list, a trim order with bends, and a roof report your shop can run from.
No re-measuring and no tracing by hand. When a report can't be read automatically, you draw it yourself in the same tool.
The roof drawing and the lengths printed on it come straight off the PDF, and every line is checked against the report's own numbers, so you see it matches before metal is cut.
Drag a corner, relabel a line, set each plane's pitch, or delete a plane that isn't getting metal. You can also trace a photo or a hand drawing from scratch.
Every panel length, plane by plane, with a layout drawing of each section lettered to match its cut page. Panels longer than your maximum are flagged.
Every eave, rake, ridge, hip and valley cut into the stock lengths you use, with the bend for each piece, plus ridge J's, touch-up, rivets and caulk.
Set each profile's coverage width and maximum length, your trim stock lengths, laps and bend rules once. Your logo goes on every printout.
Add your estimators and shop. Saved takeoffs live in one library for your company, ready to reopen and reprint.
Most roofs go from report to printed order in a few minutes.
Drop in the PDF. The vendor is detected automatically and the roof comes in with its lines labelled.
See which lines match the report's printed lengths, fix any that don't, and set the panel profile and color.
Download one PDF with the panel cut list, the trim order and bend list, and the roof report.
Metal Cut List is invite-only while we set up our first roofing companies. Tell us about yours and we'll get you set up.
Already invited? Create your login with the email your company added.